- VENTURLITE® 2020 0.5mm aluminium reinforced sheet 20mm Mill Finish Painted after manufacture
- ACP81248 Deep Channel 20mm
- ACP81636 Corner Joiner 20mm
VENTURELITE® 2020 can be easily cut and drilled with standard tools, such as circular saws, routers etc.
Negative rake blades are recommended for circular saws.
Caution should be taken in case of aluminium burrs on cut edges. Face sheets must be kept clean and free from any oil or grease before painting or bonding.
Components and complete interiors can be fabricated using VENTURELITE® Profiles & Assembly Accessories, cutters and polyurethane paste adhesives.